You are here

Panel Unit

Panel units are ideal for mineral-based industrial fluids in small to medium-sized reservoirs with low flow rates.  Whether you have an application that needs regular filtration, or a maintenance location where you bring equipment to be filtered, the Des-Case panel unit is a made-to-order solution that can be mounted where you need it most.

Build yours today by simply clicking on the desired options below.

Power Supply

What type of power supply do you need? Visit this page to learn more about these options.

Viscosity Range: ISO VG 10-680 at 100F

  • Automatic pressure relief valve
  • Non-bypass filter heads
  • Dual-stage filtration
  • Durable frame with drip pan for direct mounting
  • Industrial powder-coated paint
  • One-year warranty
  • Decontaminating systems
  • Cooling systems
  • Collecting oil samples for analysis

Intended Use

  • To be used for offline, secondary filtration and not inline filtration
  • In general industrial environments, both indoors and outdoors (IP rating of 54)
  • For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 104°F (-26°C to 40°C)
  • Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses
  • This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

 

Operating Temperatures:

  • -40°F to 150°F (-40°C to 66°C) for standard unit with clear PVC plumbing hoses
  • -20°F to 212°F (-28°C to 100°C) for custom unit with hydraulic plumbing hoses and Viton or EPDM seals

Materials:

  • Frame: Carbon steel
  • Paint: Industrial powder coat
  • Filter Heads: Aluminum
  • Fittings: Zinc-plated steel and/or brass
  • Pumps: Aluminum/steel
  • Plumbing Hoses: Clear PVC with steel wire
  • Gaskets: Buna-N

Filter Indicators:

  • Filter indicator pops at 22 psid (1.55 bar) as warning that filter elements need to be replaced

Pump Relief:

  • Opens at 65 psi (5.49 bar)

Weight:

  • Approximately 110 to 135 lbs (50 to 61Kg). Will vary depending on options selected

Dimensions:

  • 15.6"L x 23.4"W x 25.8"H

Viscosity Range:

  • Up to ISO VG 680 at 100°F/38°C (3000ssu/ 648cSt)

 

Replacement Filter Element Part Numbers:

PART # DESCRIPTION
FC-AF 3-micron Filter Element
FC-BF 6-micron Filter Element
FC-CF 12-micron Filter Element
FC-DF 25-micron Filter Element
FC-JF Water Adsorption Filter Element

 

Elements are sold in cases of six and can be mixed and matched.

Find a Distributor