IsoLogic™ Breathers

IsoLogic™ Sensor Technology adds value to any reliability program by detecting and recording spikes in humidity and water ingress. Early detection of system upsets, avoidance of equipment failures and unplanned downtime saves you money, maintains operational efficiency and provides one less headache for you and your organization.

Unlike any breather on the market, IsoLogic has eliminated the subjectivity of color-changing desiccant media, allowing you to know the exact moment your breather is fully spent and should be replaced. Shorten time-consuming, scheduled lube routes by using RFID and Bluetooth technology to collect data on multiple breathers at the same time when syncing them with the IsoLogic app. Decrease the risk of workplace injuries by monitoring breathers installed on remote or hard-to-access equipment. Whether you’re on a plane, in the office or at home, view all breather statuses and trend data on the web platform from anywhere, anytime. All you need is the internet.

Contact Us

Explore the IsoLogic breather

Product Specs
DC-IL-EX-4

DC-IL-VG-1

DC-IL-VG-4
Unit Height (in / mm) 10.0 / 254 5.31 / 134.9 10.125 / 257.2
Unit Diameter (in / mm) 5.665 / 143.88 2.52 / 64.01 4 / 101.6
Connection Size 1" Female (FNPT) 3/8" Multi-Fit (NPT, BSPP, BSPT) 1" Multi-Fit (NPT, BSPT, NPSM)
Amount of Silica Gel (lbs / kg) 4.2 / 1.91 0.28 / 0.127 1.88 / 0.85
Adsorption Capacity (fl oz / ml) 27.0 / 798 1.68 / 49.7 11.3 / 353
Max. Flow Rate (cfm) 24 @ 1psid 1.45 @ 1 psid 2.98 @ 1 psid
Max. Flow Rate (lpm) 680 41 84
Filter Efficiency 3 micron absolute (ß₃≥200) 3µ absolute (β₃≥200) 3µ absolute (β₃≥200)
Operating Temp. Range (°F) -4˚ to 129˚ -4° to 129° -4° to 129°
Operating Temp. Range (°C) -20° to 54° -20° to 54° -20° to 54°

Module Materials & Components:

Casing: Polycarbonate, Steel (ball plunger)

Cap: Thermoplastic elastomers (TPE), Steel (screws)

Circuit Board: LED lights, FR4 Fiberglass

Batteries: 1.5V alkaline AAA (Manganese Dioxide,

Zinc, Potassium Hydroxide, Graphite)

Module Battery & Power:

Supply Source: Three AAA Batteries (each rated 1.5 V

d.c., Max 1200 mAh)

Supply Voltage: 4.5 V d.c.

Operational Current Rating: 30 mA

Life Expectancy: 2 years (use and temperature dependent)

Module Environment:

Intended for indoor and outdoor use

Altitude up to 5,000 meters

Maximum Relative Humidity: 100% at up to 54˚C

Dustproof / Waterproof (IP66)

Hazardous Ratings: Not rated for hazardous locations

FCC, CE, Reach, RoHS

Wireless Syncing:

2402.0 - 2480.0 MHz Bluetooth 4.0 Low Energy

13.56 - 13.56 MHz RFID

Communication Range: 100ft (30m) line of sight

Device Compatibility:

Android

Bluetooth 4.0 and higher

Android OS 5.0 and higher

Apple

iOS 10.0 and higher

Data Storage:

Data readings every 60 minutes

Stores 365 days of hourly data points

Model Max. Airflow at 1 psid  Recommended Max. Volume
Gearbox / Storage Tank Hydraulic Reservoir
DC-IL-VG-1  1.45 / 41.06 lpm 35 gal / 132 L  5 gal / 19 L 
DC-IL-VG-4 1.8 cfm / 50.9 lpm 500 gal / 1893 L 200 gal / 757 L 
DC-IL-EX-4 24 cfm / 680 lpm 1000 gal / 3785 L 400 gal / 1514 L

Please Note: This is intended as a general guideline for sizing only; other considerations, such as: humidity level, frequency of air flow, ambient temperatures, and chemical compatibility are very important in sizing a breather properly. Larger applications and special circumstances typically require the most thorough analysis. Please contact Des-Case for assistance in sizing a breather.

APPLICATIONS

  • Intermittent Operations
  • Gearboxes
  • Low-Flow Applications
  • High-Humidity
  • Washdown

Description Part Number  
PVC 3/8" Female NPT to 1/2" Male Threaded NPT Adapter DC-37 DC-IL-VG-1
PVC 3/8” Female NPT to ¾” Male Threaded NPT Adapter DC-35
PVC 3/8” Female NPT to 1” Male Threaded NPT Adapter DC-36
PVC 1” Female NPT to ¾” Male Threaded NPT Adapter DC-17-T DC-IL-VG-4
PVC 1” Female NPT to 1” Female Threaded NPT Adapter DC-13-T
Polypropylene 1” Female NPT to 6 Bolt Circular Mounting ((Ø 3.5") DC-12-T
Steel 1” Female NPT to 6 Bolt Circular Mounting ((Ø 3.5") DC-12-T-SD
Aluminum 1” Female NPT x 1-1/2” Bayonet Style DC-15-T
Steel 1” Male NPT to ¾” Male Threaded NPT Adapter DC-EXA-17 DC-IL-EX-4
Steel 1” Male NPT to 1” Male Threaded NPT Adapter DC-EXA-10
Steel 1” Male NPT to 6 Bolt Circular Mounting ((Ø 3.5") DC-12-T-EX

Sensors and Connectivity

  • Detect and record spikes in humidity and water ingress.
  • Know the exact moment your breather is fully spent and should be replaced. Sensors inside the breather provide a precise digital reading of remaining breather life, saturation direction and breather temperature.
  • Shorten time-consuming, scheduled lube routes by using RFID and Bluetooth technology to collect data on multiple breathers at the same time when syncing them with the IsoLogic app.
  • View all breather statuses and trend data on the web platform from anywhere, anytime.
  • Decrease the risk of workplace injuries by monitoring breathers installed on remote or hard-to-access equipment.

Desiccant Breather

  • Removes moisture in the headspace of equipment
  • Eliminates rust-forming condensation
  • Prevents sludge deposits and water-contaminated oil
  • Prevents contamination ingress
  • Provides longer lubricant life
  • Reduces wear and tear on equipment, prolongs life

Available_on_the_App_Store_(black).png

global-playstore.png

Search for Des-Case or IsoLogic